 |
 |
6,000 RPM Grinder w/ 7 inch Dust Shroud |
|
Heavy Duty Dewalt Grinder (model # D28494S, 4 HP, 6,000 RPM) that can be easily mounted onto our EZ Grinder frame or used on it's own in areas that the EZ Grinder can not reach.
Please note - When purchased individually, the unit is sold without a diamond wheel. Diamond wheels may be purchased seperately from us.
No posts found
Add new post
Our 7 inch dust shroud is designed specifically for the DeWALT grinder model # D28494S.
It is constructed out of heavy duty steel to withstand years of abuse. The dust shroud is attached to the grinder via a clamp so the shroud is locked firmly in place with no need to retighten set screws that can loosen due to vibrations and heavy use.
We have designed our dust shroud so that you can grind as close to the wall as necessary while capturing virtually all dust with adequate suction. We accomplish this with these 3 features:
- Our dust shroud is set slightly off center so the diamond cup wheel juts out as close to the edge of the shroud as possible to grind as close to walls and in corners as possible.
- Our Urethane Seal is purposely cut slightly short so that there is a gap at the front of the shroud.
- A metal protector plate is placed between the urethane seal and the stainless steel heavy duty clamp during normal operation. The function of the clamp is to maintain sastisfactory suction for dust capture while grinding to within a 1/4"-1/8" of vertical obstructions. If the metal protector plate is removed, the grinder can grind to within an 1/8" or closer depending on the diamond cupwheel being used. Please note: depending on the amount of suction your vacuum provides, operation of the dust shroud without the protector plate may create dust.
To adjust the shroud, the urethane seal needs to be raised up off the concrete just enough so that it doesn't drag while grinding. This not only allows for dustless grinding it also guarantees you will never have suction lock.
The urethane seal will eventually show wear due to uneven concrete pushing it into the diamond cupwheel. When this happens the seal can be turned upside down or trimmed with a utility knife. Replacement Seals can be purchased from us here.
Please click on images for larger views.
Warranty
Our dust shroud comes with a one year warranty that covers any defects due to faulty materials or workmanship.
The DeWALT grinder is covered by a manufacturer's 3 year limited warranty and 1 year of free service to cover worn parts caused by normal use during the first year.
